Window Detection in Facades Using Heatmap Fusion

Journal of Computer Science and Technology - Window detection is a key component in many graphics and vision applications related to 3D city modeling and scene visualization. We present a novel...     

酯交换法合成碳酸甲乙酯催化剂的研究进展

碳酸甲乙酯（EMC）是一种环境友好型的不对称碳酸酯，因其独特的结构性质被广泛用作溶剂或有机合成中间体，特别是随着锂离子电池的迅猛发展，其作为电池电解液主要成分市场需求量急增。文中简单介绍了光气法、氧化羰化法和酯交换法合成碳酸甲乙酯的研究进展。重点针对最具发展前景的酯交换法合成EMC工艺路线中所用催化剂进行了综述；讨论和分析了该路线所用催化剂的类型、结构、性质及性能，并对当前研究中存在的问题进行了归纳和分析总结。最后本文分析并展望了酯交换法合成EMC催化剂的研究方向及新型合成工艺发展趋势，提出研发经济、高效、稳定且制备工艺简单的非均相催化剂，并与反应精馏技术耦合是今后的主要发展趋势，期望为EMC的高效合成提供参考和借鉴。     

基于BEPCⅡ数字束流位置测量系统电子学系统的设计与实现

BEPCⅡ加速器的束流位置测量系统（BPM）模拟电子学经过十余年的运行逐渐老化，故障率上升，亟需进行升级改造。本文根据该需求，自行设计了基于BEPCⅡ系统参数的数字BPM电子学系统，内容包括模拟信号处理电子学、数字信号处理电子学、BPM固件算法逻辑、数据获取软件以及系统测试等多个部分。设计的数字BPM电子学系统经实验板级性能测试、实验室系统测试以及在线束流测试，结果表明该系统能满足BEPCⅡ装置对束流位置测量的需求。     

Porous Si3N4 ceramics prepared by aqueous gelcasting using low–toxicity DMAA system: Regulatable microstructure and properties by monomer content

In this study, the low–toxicity monomer N, N–dimethylacrylamide (DMAA), serving as both gelling agent and pore–forming agent, was adopted to fabricate porous Si₃N₄ ceramics with a regulatable microstructure and property by aqueous gelcasting. Results indicate that monomer content played an important role in regulating and optimizing the properties of sintered bodies. With increasing monomer content (5.94–30.69?wt%), both slurry viscosity (maximum 0.14?Pa?s at 95.40 s^?1) and green body strength (11.35–49.23?MPa) exhibited monotonic increasing trends, demonstrating superior mechanical properties to those obtained using the neurovirulent acrylamide (AM) gelling system. The increased monomer content not only improved porosity, but also promoted α→β–Si₃N₄ transformation as well as β–Si₃N₄ grain growth through enhancing the connectivity of interlocking pores and accelerating the vapor phase transport during liquid–phase sintering. These variations in phase composition and microstructure derived from the varied monomer content further resulted in monotonic changes in porosity (40.32–51.50%), mean pore size (0.27–0.38?μm), flexural strength (202.77–132.15?MPa), fracture toughness (2.93–2.32?MPa?m^1/2), dielectric constant (3.48–2.78) and loss (3.52–3.09?×?10^?3) at 10?GHz for sintered bodies, displaying an excellent comprehensive properties. This study suggests a promising prospect for DMAA in preparation of high–performance porous Si₃N₄ ceramics by aqueous gelcasting.     

Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

板栗壳黄酮结构分析及其对胰脂肪酶活力的抑制作用

在分析板栗壳黄酮结构的基础上，研究其对胰脂肪酶的抑制作用及类型。采用醇提法提取板栗壳中的黄酮，并用AB-8大孔吸附树脂进行纯化，冻干后得到的黄酮含量为（107.50±1.00）mg/g，提取得率为（5.66±0.05）%。利用超高效液相色谱-四极杆/静电场轨道阱质谱联用技术对板栗壳黄酮进行结构分析，鉴定出8 种黄酮类化合物。采用对硝基苯酚法测定胰脂肪酶活力，分别考察板栗壳黄酮对胰脂肪酶的抑制效果及不同反应条件下板栗壳黄酮对胰脂肪酶活性的影响，结果表明，板栗壳黄酮对胰脂肪酶有较好的抑制作用，半抑制浓度（half maximal inhibitory concentration，IC50）为0.074 mg/mL，且使胰脂肪酶最适pH值向碱性偏移。通过Lineweaver-Burk双倒数作图法确定其抑制类型为非竞争性抑制，抑制常数Ki＝53.19 mg/mL。由此可见，板栗壳黄酮是一种效果良好的胰脂肪酶抑制剂。     

Effects of CO Atmosphere on the Pyrolysis of a Typical Lignite

To reveal the effect mechanism of CO atmosphere on coal pyrolysis, a study on raw and demineralized lignite was carried out in a horizontal tube furnace under N₂ and CO/N₂ atmosphere. CO had a negligible effect on the char yield at low temperatures, whereas it enhances the char yield at temperatures higher than 550 °C. The release of tar was higher in the presence of CO above 450 °C because of more free radicals, which reduced low‐temperature crosslinking, and higher selectivity of hydroxyl groups to phenols in the CO‐containing atmosphere. The yields of CO₂ and H₂ increased, water and CO yields decreased under CO/N₂ atmosphere. Light hydrocarbon gases were not affected by changing the reaction atmosphere. The difference between product yields from raw and demineralized coal confirmed that the catalysis of inherent minerals had a great catalytic effect on the water‐gas shift reaction and Boudouard reaction.     

LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

A novel sandwich-like structure was first proposed to adjust the electrical properties of NTC thermistors. The LaCr_0.7Fe_0.3O₃-NiMn₂O₄ supported composite ceramics with sandwich-like structure were initially fabricated via traditional solid-state reaction and uniaxial pressing methods, which allowed for the advantages of each component to be integrated into one material. X-Ray diffraction analysis indicates the ceramics mainly consisting of orthorhombic perovskite LaCr_0.7Fe_0.3O₃ and cubic spinel NiMn₂O₄ phases. SEM images manifest that the three layers adhered well to each other and exhibited high density. For electrical properties, the ρ_25°C was expanded to a wide range of 1182–110,233 Ω?cm and could be adjusted to the desired values by tuning the volume ratio of two basic layers, the B value was enhanced from 3358 K to 4167 K by NiMn₂O₄, and the thermal stability was improved by LaCr_0.7Fe_0.3O₃ with a resistance shift less than 0.55 % after annealing at 150 °C for 1500 h.     

Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

涤纶短纤维干热收缩率测试影响因素探讨

根据生产应用与测试实践,对涤纶短纤维干热收缩率测试过程中前处理烘箱的功率、样品处理后冷却条件,烘箱鼓风功能使用几种影响因素进行了实例应用说明.